The PG 2.5-inch SATA SSD is developed using SMI main control and TLC flash memory chips. The product's design, development, sampling, debugging, testing, batch production, and mass production processes comply with GJB's quality management system and manufacturing requirements; PG 2.5-inch SATA SSD adopts SMI2259xt2 main control, (54mmx41mmx5.7mm) external dimensions, supporting S M. A.R.T. health status monitoring.
Capacity: 128GB, 256GB, 512GB, 1TB, 2TB
PCI Express Gen3: Supports 3 channels
Compliant with PCI Express Base Specification Rev. 3.0
Compliant with NVM Express Specification Rev. 1.3
Static and dynamic wear balance and bad block management
4k LDPC + raid
Built in TLC NAND flash memory: TLC NAND flash memory
Support SMART and TRIM commands
Supports AES 128/256
100% testing of hardware and software
SSD controller: SMI2259xt2 | Storage particles: Kioxia |
Interface: SATA III | Agreement: SATA agreement V3.2 |
Appearance:54mmx41mmx5.7mm | Connector: SATA |
Capacity: Standard product capacity::128GB、256GB、512GB、1TB、2TB Enterprise grade product capacity::120GB、240GB、480GB、960GB、1920GB | Read and write performance: Maximum continuous reading::540MB/S Maximum continuous writing:480MB/S |
Operating Voltage:3.3V±5% | Power Consumption:Standby mode≤0.7W,Operation≤4.0W |
operation temperature: Industrial temperature range(I)(I):-20-70℃ Wide temperature range(W):-40-85℃ | Storage temperature: -50-95℃ |
Vibration:16.4g 10-2000Hz | Impulse:1500g 0.5ms |
Humidity:5%-95%(non-condensing) | Data storage:20 years |
MTBF: 2,000,000 hours | TBW:128GB:249TB 256GB:499TB 512GB:998TB 1TB:1996TB 2TB:3898TB |
MLCC capacitor PLP power down protection: The PLP power down protection circuit is composed of a power management chip and MLCC capacitors. When there is an abnormal power failure, the power supply is provided to write Buffer data to the storage particles of the electronic disk, achieving the power down protection function. |